- Nov 30, 2018 -
The Right Way To Install Basin Faucet In Your Bathroom
When purchasing a single-handle basin faucet, you should pay attention to the diameter of the water outlet. At present, most of the market is filled with hard pipe. Pay attention to the height of the water pipe. It is best to go down from the basin to about 30. When installing, be sure to choose a special angle valve, the angle valve must be fixed with the hot and cold water pipe of the wall outlet. If there is a distance between the angle valve and the water pipe on the faucet, you need to purchase a special pipe to lengthen the link. Do not use other water pipes to connect, otherwise it will leak and fall off due to large water pressure. If the inlet pipe is too long to exceed the outlet pipe, it is enough to cut it off.
Note: Do not bend the water pipe to 90 degrees or more than 90 degrees. When installing the basin to remove water, please don't forget to buy the small interface of the faucet (the faucet is shorted). The water pipes buried in the wall must be flushed before installation.
Here enclosed the Schematic diagram of the Kitchen Faucet installtion