- May 03, 2018 -
A well-designed shower can ensure that the amount of water dispensed from each nozzle is essentially the same, so be sure to choose the shower to see the water. The water saving function is the key to consider when choosing a shower. Some showers use steel ball spools and are equipped with a hot water controller that regulates the inflow of hot water into the mixing tank so that the hot water can flow quickly and accurately. Such design reasonable showers save 50% more than ordinary showers.
When the shower is selected to be tilted out of the water, if the water at the top of the spray hole is small or not at all, it means that the internal design of the shower is very general. Even if there are multiple water discharge methods such as lasing and spraying, the user may have to To the corresponding pleasant experience.
Next, look at the sprinkler. Pay attention to whether the shower is easy to clean. The clogging of the outlet of the shower is often caused by the accumulation of impurities in the screen cover. If the shower is used for a long time, it will inevitably have a scale deposit. If it cannot be cleaned, some of the nozzle holes may be blocked, in order to avoid poor water quality. Causes clogging of the outlet, well-designed shower nozzles often stand out, easy to clean, or the nozzle is made of silicone material, cleaning with a rag or hand can remove the scale deposited on the nozzle. Some showers are also equipped with a function to automatically remove limescale. You can ask for more in the shower shower.
Look at the coating and the valve plug. In general, the brighter and more exquisite the surface of the shower, the better the processing of the coating. A good valve core is made of highly rigid ceramics, smooth, wear-resistant, eliminate leaking, consumers must try to twist the switch, if the feel is poor, this shower is best not to buy.
Finally, shower accessories will directly affect the comfort of their use, but also need to pay special attention. Such as the flexibility of water pipes and lifting rods, the ability of shower hoses to increase the resistance to bending of steel wire, whether anti-twisting ball bearings are installed at the shower joints, and whether there are rotation controllers on the lifting rods, etc